Helmet Intercom PARTNER

The basic device of the new AKE-PowerCom-Series

Your Partner for Shared Trips!!

The PARTNER motorbike helmet communication system is designed for two persons and is equipped with an automatic microphone switch to suppress driving noise.

PARTNER is, when equipped with the appropriate helmet sets, also suitable for very high driving speed and allows a comfortable communication between driver and pillion rider at any time.

PARTNER doesn't need much space; it is mounted in a solid case of aluminium and is plugged to the 12V power supply of the motorbike.

PARTNER power goes on automatically when you plug in the helmet connectors. This prevents discharging the motorbike battery by accident.

Important device features:

• Fit for motorbike Interkom:
  Crystal-clear hands-free full duplex helmet-to-helmet intercom system makes a safe voice communication possible even with very high driving noises.

• Effective elimination of disturbing driving noise:
  Expensive filters reduce the driving noise. If nobody is talking, a fit for motorbike voice-switch ensures also at high speed a soft muting of the microphone signals. The helmet microphones are switched off completely if they are not needed.
  
  
• Various adjustment settings:
  Lowest voice volume level, driving noise compensation, volume of intercom, may be adjusted individually.
  
  
• Easiest handling because of power supply:
  No changing or recharging of batteries necessary.
  
  
• Less mounting effort because of automatic power on of the power supply:
  Plugging in the helmet connector of driver or pillion rider will automatically power on the PARTNER. This allows connecting the system directly to the battery of the vehicle or optionally to any 12V power supply.
  
  
• Extensive integrated vehicle dejam facilities:
  Save time and money. PARTNER is extremely safe from electronic vehicle jam. PARTNER also operates on Scanbus power supply.
  
  
• Robust assembly for harsh operation:
  PARTNER is assembled in a solid waterproof aluminium case. It has weatherproof helmet plug outlets equipped with raised markers for easy plugging in the correct position even with gloves. The electronics are protected by an automatic power off against over and under voltage. All amplifier outputs are short-circuit-proof and are equipped with overload protection.
  
  
• Third and fourth helmet connection:
  On request additional helmet connectors for sidecar operation can be added.
  
  
• Helmet sets:
  High quality helmet installation sets are available for full face helmets, flip-up helmets and open face helmets. On request your dealer will provide the installation of your helmet sets.
  
  
• Dimensions: 70 x 137 x 20mm
  

Device connectors:

• Driver and pillion rider: 2 x 5 pin DIN-clutch in weatherproof case of aluminium
• 12V power supply by the motorbike battery
• Power on automatic for accessories

Scope of delivery:

Electronic control device, velcro fastener, cable fixer, assembly instruction, operating instructions

Order No.: 30311