Bluetooth replaces cable connections to helmet


Cables or Bluetooth? Take your choice!

Both types of connections have advantages or disadvantages, decide for yourself:

CableBluetooth™
Type of connection
wire-bound wireless
Sound quality
unlimitedlimited
Signal/noise ratio 1)
unlimitedlimited
High-frequency radiation
noyes
Failure during interfering signals
noyes
Handling
no yes (pairing, activating)
Service/maintenance
noyes  (charging of battery)
Repair expense
littlehigh
Relative costs
littlehigh

1)Ratio between maximum undistorted signal and basic noise, etc., important feature when used at very different driving noises.

If you like your connections rather inexpensive and best quality with cables: No problem, all AKE components are compatible, e.g. you can use the helmet loudspeakers and the noise compensated microphone of the Bluetooth helmet set also via cable with any PowerCom system. Just change the plugs and you are ready to go.

Not only the cable to the helmet can be replaced by a Bluetooth line, but also the connection to other devices, as e.g. to the mobile phone, etc.

Choose your desired combination from the various possibilities:

One Helmet communicaton without control electronics

AKE Helmet Set-cable -GPS 1)
-Bluetooth-

AKE Helmet Set-cable -Mobile phone 1)
-Bluetooth-

AKE Helmet Set-cable -Two-way radio 1)
-Bluetooth-
 
Portable helmet-to-helmet communicaton with BlueCom-Repeater
AKE Helmet Set -Bluetooth-

AKE
BlueCom
pocket repeater

-cable -Pocket radio
or -GPS
AKE Helmet Set-Bluetooth--cable - walkie-talkie
or mobile phone
 
Motorbike entertainment system with PowerCom control electronics
AKE Helmet Set driver -cable -

AKE
PowerCom

Motobike-communication-system

e.g. INNOVA

-cable -Audio 1)
-Bluetooth--Bluetooth-
 
-cable -GPS 1)
-Bluetooth-
AKE Helmet Set pillon-cable --cable -Mobile phone 1)
-Bluetooth--Bluetooth-
 
-cable -Two-way radio 1)
-Bluetooth-
AKE Helmet Set 3. helmet-cable --cable -Multi-purposes 1) 2)
-Bluetooth--Bluetooth-

1)Astandardized Bluetooth interface is needed for the Bluetooth connection.
2) Multi-function equipment with mobile phone, audio and GPS like PDAs, TomTom Rider, Garmin Zumo, etc.

Bluetooth Helmet Set 101

The wireless helmet set with an elegant design!
  • Fit-for-motorbike handling of Bluetooth mobile phones
  • Fit-for-motorbike handling of GPS with Bluetooth interface
  • Compatible to all PowerCom motorbike communication systems
  • driving noise compensated microphone
  • Two loudspeakers made for high volume
  • Multifunctional button for switch-on, pairing and volume
  • Replaceable battry for a long operating time
  • Voice transmission even at high speeds
  • Not readily noticeable when installed. The Bluetooth-Helmset 101 can be integrated almost invisibly in helmets with neck padding due to the special design.
 Details AKE Bluetooth Helmet Set
AKE Bluetooth-Helmet-Set 101

PowerCom Bluetooth Helmet Connector (Dongle)

AKE Bluetooth-Dongle 

The wireless freedom for audio, GPS, two-way radio, mobile phone and intercom!

With the Bluetooth Helmet Connector PB-HC2 from AKE you have from now on the possibility to connect all motorbike communication systems of the AKE PowerCom series wireless to a Bluetooth helmet. Therefore, the inconvenient cable to the helmet is no longer necessary. The Bluetooth Helmet Connector gets the power from the PowerCom motorbike intercom system, loading is thus not necessary. 

The Bluetooth Helmet Connector now is available with "PAIR and GO"- funktion, devices will connect automatically once paired.

Sets with Bluetooth Helmet Set 101 and Bluetooth Helmet Connector PB-HC2 will be delivered already paired by AKE, a pairing procedure is not necessary!


On the motorbike the Bluetooth connection from motorbike communication system to the helmet will immediately be available. This way you have the usual convenience of the PowerCom motorbike communication systems on hand. Starting with the fit-for-motorbike intercom as well as the intelligent audio, navigation, two-way radio and mobile phone hands-free kits - they all can be connected with the helmet vial Bluetooth.

Basically, all Bluetooth helmets can be used as long as they are working with Bluetooth™ headset protocol. But an optimum transmission quality can only be guaranteed when using original AKE helmet sets1)

 Details PowerCom Bluetooth-Helmet Connector

 

Bluetooth helmet with PowerCom-motorbike intercom
1)Not all that glistens is gold:
Depending on the Bluetooth helmet used, the driving noise compensation and the voice recognition of the helmet microphone, as well as the frequency response and the volume of the helmet loudspeakers might more or less be reduced.

Fit-for-motorbike entertainment with Bluetooth in all directions! (Bluetooth to mobile phone, GPS, etc.)

AKE PowerCom Bluetooth-Modul

With the PowerCom Bluetooth modules PBM-H2, PBM-N2, etc. you'll have the possibility to connect the PowerCom electronic box wireless with Bluetooth mobile phone, Bluetooth GPS and other Bluetooth equipment.

All the signals are thus operated through the PowerCom system and are comfortably regulated and fit-for-motorbike and nevertheless you are using Bluetooth.

With this you don't have to plug in your mobile phone, GPS, etc. When you have your mobile phone or GPS with you, the Bluetooth connection to the helmet will be activated immediately.

With a combination of PowerCom system, Bluetooth Helmet Set, Bluetooth Helmet Connector and Bluetooth module(s) you'll get a wireless connection to the helmet and also to the GPS or mobile phone, etc. ...

  • listen to the GPS
  • listen to radio / MP3
  • talk to another motorbiker via two-way radio
  • receive phone calls and when using a mobile phone with voice control even make calls
  • talk with your pillion and much more

... and everything is fit-for-motorbike and hands-free!

 Details PowerCom Bluetooth module for mobile phone and 2-way-radio
 Details PowerCom Bluetooth module for GPS- and audio devices


BlueCom 102 Pocket Repeater
ingenious helmet to helmet Bluetooth solution for all cases!

Anwendung AKE BlueCom Taschenrepeater

With the handy Bluetooth pocket repeater BlueCom 102 from AKE you can get a wireless connection from helmet to helmet. An installation on the motorbike is not necessary.

The new multi-channel master technology from AKE makes it possible to interconnect any Bluetooth helmet set or even simple Bluetooth headset with standard protocol without any restrictions (full duplex communication).

By using an audio input and a combined two-way radio/mobile phone input it is possible to optionally connect a pocket receiver or GPS and a two-way radio or mobile phone. With this new technology, the driver as well as the pillion can hear the audio signal and they are able to talk on the phone or two-way radio without switching.

The AKE Plug & Play - service for BlueCom for 2 complete sets:

The BlueCom 102 pocket repeater is available also in a complete set with two AKE Bluetooth Helmet Sets 101. All complete sets are already paired on delivery, i.e. no detailed pairing is necessary!

 Details BlueCom 102 Pocket repeater and BlueCom for 2 complete set


Questions about motorbike communication systems

Top